What affects a Garage Door Weight?

A garage door can either be manual or automatic. If you have an automated door, a switch or a remote would regulate it. For an automatic garage door, the lift of the weight is subject to the horsepower of the garage door opener. A half of horsepower can lift roughly around 300 pounds. This is the average load of a two-vehicle steel door, and a one horsepower door opener can, without much of a stretch, lift roughly 400 pounds.

The weight is subject to numerous factors, but there is no ideal garage door weight. The factors may include the doorway size, insulation or protection, material, doorway thickness, the amount of steel in use, the type of door installed, and so forth. A wooden door will have a different weight than a roll-up garage door weight.

Wood garage door weight 

The kind of wood in use for the door matters a great deal just as the style. Wooden garage doors are typically heavier and retain water when it is raining, signifying 50 extra pounds to their weight.

Glass Doors

The contemporary glass garage doors are the ideal improvement to one’s home’s glass scopes and yards. They delightfully meld the indoor and outside spaces. Along with low up keeping, they retain every climate condition. Glass doors being the heaviest increase the garage door weight to 400 pounds.

Insulations

Since the garage door weight is also dependent upon the insulation or protection brought in use, therefore, it becomes necessary to bring it into consideration. For a standard 16×7 garage door, the weight may be around 150 pounds. But with the insulation or protection, the weight of the garage door increases. Protection can weigh about 25 pounds. When we include the weight of the back steel, the weight of the door increases by another 30 pounds. This eventually increases the weight of the garage door to 205 pounds.

However, the type of garage door you intend to install brings a change in the weight. Garage Door Doctor has experts who can guide you on how much weight should be of a garage door so it would work effectively with the right balance. If you are interested in more information, you can call us on 281-855-9300 or 281-578-7659

The post What affects a Garage Door Weight? appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/what-affects-a-garage-door-weight

How to Reset Clicker Garage Door Keypad without Code

Keyless entry options for your garage door are a great invention. You’ll never have to get out of your car in the rain or snow again, just to open the door.

With a few presses of a button, you’ll be indoors where it’s warm and dry. However, sometimes you’ll need to change the code or use a new remote, and that’s where things get difficult. Maybe you forgot the code, or you moved into a new home and don’t have the code.

In this article, we’ll show you how to reset clicker garage door keypad without code.

Getting Started

You’re stuck outside of your garage, and you need to know how to reset clicker garage door keypad without code. What do you do? Luckily, it’s quite simple to do.

You’ll need to get into your garage and reach the motor unit of the opener. This is usually located up high, so get a ladder to enable you to reach it. Once you’ve done this, locate the ‘learn’ button, usually located on the side of the unit. Hold the button until the light on the unit goes out. This indicates that the unit has forgotten the old code.

Once you’ve done this, you’ll need to press the ‘learn’ button again. This should bring the light on again. Once this has happened, go to the keypad and enter the code you want to use for the door from now on. The motor unit’s light should blink, to show it has accepted the new code.

Press the ‘learn’ button once more, and press a button on your remote. Once you’ve done this, the door should open for you. Repeat this step with all other remotes in the home, to ensure they can all open the door.

Here’s how to reset clicker garage door keypad without code …

How to Reset Clicker Garage Door Keypad Without Code

If you don’t have a keypad on your garage door, you can still reset the code so you can get into your garage. Take your remote and remove the cover, so you can see the inside of it. You’ll see there are some switches inside it that dictate the code that’s used to open your garage door. Move them as needed to create a new code. Make sure you do this for all of your garage door remotes.

Once you’ve done this, look at the garage door opener unit in your garage. There will be switches on this that will match the switches in the remote. Move these so these match the new codes in the remotes, and replace the covers back onto anything that you removed.

Once you’ve done this, test your remotes to see if they work. If they did, the door should open and close as normal.

Related: How to Change Battery in Liftmaster Garage Door Opener Keypad

Rolling Codes

If you have an older garage door and are worried about security in your home, you should look into getting a newer opener with rolling codes. These are the most modern way of using garage door openers and are a good way of keeping your garage safe.

These codes are ‘rolling’ as every time you press the button on your remote in order to get in, your opener will ‘roll’ the codes. This means the codes will change every time you use it. Because of this, only your remote should work on the door. This stops anyone from coming within the distance of your door and trying to capture the codes themselves.

Other Garage Door Opening Options

If you don’t want to worry about clickers for your garage door, you could look into getting a keypad for entry. These sit by the side of the door and require the correct code to be put in before the garage door will open. These are perfect if you’re worried about security, as they can only be opened by someone who knows the code. You also won’t have to worry about finding your clicker when you come home. As long as you know the code, you’ll be able to get in.

Keypads are also great for children, as it gives them a safe way of opening the garage door without having to give them keys. If you’re worried about them losing keys to your home, a keypad is a great way around this.

Common Garage Door Opener Repairs

Having to reset your clicker is one thing that you may have to do when you move to a new home or have problems with your opener. Here are some other issues you may have with your opener, and how you can easily fix them.

The door keeps auto-reversing: Is your door auto-reversing when you’re trying to close it? It could be that there’s something blocking the photo-eye. These eyes sit at either side of the door near the ground, and they can easily get blocked, knocked out of place, and covered in dirt. Realign your photo eyes and clean them off, and your door should start working again.

Remote won’t work: There are several reasons why your remote won’t work. Firstly and most commonly, you’ll see that the batteries have died, so they’ll just need to be changed out. If the contacts have corroded, you can polish them in order to make them work again. Sometimes you’ll find the door has been locked manually, so check for that too.

The door opens when you don’t want it to: Are you getting the opposite problem, that your garage door is opening and closing seemingly on its own? There’s actually a simple explanation. A neighbor’s garage door opener is probably on the same frequency, and when they hit their remote it’s opening your door. Talk to your neighbors to see what’s causing this.

It’s actually very simple to reset the code on the garage door clicker when you don’t have the existing code. As long as you have access to the garage door opener motor, you can change it. It’s an easy process and once it’s done you’ll be able to get in and out of your garage with ease.

The post How to Reset Clicker Garage Door Keypad without Code appeared first on Your Garage Door Guys.

Rolling Garage Doors: Securing Your Business

As a business owner, it’s important that your business operates smoothly and effectively. Whether you run a business that involves some type of storefront, garage, storage, or parking, you may find rolling garage doors offer the function you need to ensure your business has the security it needs when you’re not there.

In this article, we’re taking a closer look at how rolling garage doors benefit business owners of all types.

Rolling Garage Doors and Your Business

As a business owner, you’re always thinking about so many things at once. You’ve got to stay on top of everything, and that means you’re looking for ways to make your job easier. Have you considered changing out your garage doors? Rolling garage doors will bring all kinds of benefits to your business, and make things a lot easier for you. Here’s why you should consider changing your doors.

What Is A Rolling Garage Door?

As a business or homeowner, you’ll be familiar with other styles of garage doors. There are the up and over style, which is the most common style you’ll find on most garages. There are also swinging styles that are becoming popular too, thanks to the aesthetics of them. The rolling garage door is a style designed for business owners and is perfect for any business premises.

These garage doors open by rolling up onto a spool at the top of the door opening. It rolls up a track, and when it’s open it sits coiled around that spool. When the door needs to shut again, it will simply roll back down the tracks and shut the garage.

Saving Space In Your Garages

The main benefit of using a rolling garage door in your garage is that it saves so much space. As it only takes up a small amount of room at the top of the door, it’s going to leave you a lot more space to store items. Regular doors, such as an up and over door, will need more room so that will leave you less space overall.

Most businesses know that space is always at a premium. It’s amazing how much space you need, whether it be for tools, equipment, stock, or anything else that you may need. Having that extra space in your garage is going to be a real boon. If you use your garages mainly for storage, then you really do need to consider a rolling garage door.

More Space For Parking

The space-saving doesn’t just happen inside the garage with rolling garage doors. You’ll also see that you can park your cars as close as you can to rolling doors, without worrying about having space to open them. This is something that’s vital in a busy business parking lot. If you’re always getting cars and trucks coming in and out, then you’ll need all the space you can get to accommodate them.

Having that space is also helpful when you’re thinking about parking, for both staff and customers. It’s so much easier for staff when they can get parked on site. They don’t have to worry about getting parked near work, so they will appreciate being able to always get a space. Customers will also appreciate having the extra space for parking. Having that space makes it easier for them to come to your business, increasing revenue.

Fit To Any Door Space

When buying a garage door, you’ll often find that you’re limited by the style you choose. Up and over and swing doors often need a specific size opening to work. As a busy business owner, you don’t want to be spending time trying to find the right garage door for your garages.

That’s why rolling garage doors are such a boon to business owners. You’ll be able to fit a garage door to almost any opening you need. That’s any size openings, any height, and even archways and other less than regular shapes. You can order rolling garage doors for your business and it will be easier to get them installed.

Ease Of Operation

Once you have your garage door installed, everyone on your staff will need to know how to operate the door. The more moving parts that the door has, the more complicated it will be to open. If you want everyone to get the hang of the door easily, then you’ll need to get a garage door. These are so simple that it’s very easy to get to grips with it.

As they’re so easy to use, that’s one more job off your plate as the owner. Show everyone how to use the door once, and you won’t have to worry about a thing. You’ll save even more time if you decide to automate the door. All your staff will need to do is press a button and the door will open.

On the subject of ease of use, you should know that a rolling garage door is very easy to maintain. You’ll never have to worry about the door breaking down if you have it serviced annually and take care of it.

Extra Security For Your Business

You’re always going to be concerned about your business’s security. You want to do your best to keep it safe and secure from thieves and criminals. One of the best ways you can secure your business is by installing a rolling garage door.

Installing any new garage door will improve your security, as a new door is made to the most up to date manufacturing standards. A rolling garage door is especially secure though, as they are a simple design that offers no easy entry to anyone trying to get in. As they’re metal it’s very difficult to break the door itself. If you automate the door, then it will be even harder to get in. No one will be able to get a door open without a keypad code or remote that uses the right rolling codes.

If you team up your garage doors with other security measures, such as security lights and cameras, then you will have peace of mind that your garages and business is safe.

There are so many reasons why rolling garage doors are the best choice for any business. They’re easy to fit to any door opening, so there’s no worry about getting them fitted. They’re secure, they take up very little space, and they’re easy to use. Look into having a rolling garage door fitted at your business today.

The post Rolling Garage Doors: Securing Your Business appeared first on Your Garage Door Guys.

Has your garage door spring broken? Here’s what you can do.

A working garage door helps in the smooth functioning of several activities performed during a busy day. However, when you all of a sudden, find a garage door spring broken, it leaves you with two options. Either you park your car outside at an unsafe place and continue with your work, or you stop your work and get the broken spring fixed.

The latter is a sensible option that would also reduce the risk of damaging the car. A professional garage door repair service will help you solve the problem.

But let’s first discuss what does a garage door spring does?

A garage door spring plays an essential part in the opening and closing of the garage door. Without a spring, the movement of the door would become hard, and it would be much difficult to lift the door. Therefore, if you see a garage door spring broken, it is good to get it fixed before it starts spoiling the other parts of the door.

How to identify if the garage door spring has broken?

Before fixing the garage door spring, it is good to identify if the problem is with the spring or some other part that needs replacement or repair. You would notice the following signs if the garage door spring would break:

1. In the middle of the torsion spring, you might see a gap
2. With a broken spring the top of the garage door might bend
3. The door while shutting would fall quickly
4. The door denies opening when you pull the emergency rope
5. When one of the springs of the garage door breaks, it will give a jerk.
6. The most obvious sign of a spring breaking is cable hanging down.

The entire sync of the door gets disturbed if you would have a garage door spring broken. Therefore, it is good not to let the spring break. Rust and poor maintenance can be some of the reasons due to which the springs break. A professional garage door repair would help to replace the broken spring so that the door would function smoothly again. In case you need any help, call Garage Door Doctor, and our team will help you fix the door.

The post Has your garage door spring broken? Here’s what you can do. appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/has-your-garage-door-spring-broken-heres-what-you-can-do

Power Outages and Garage Door Safety

If you’re experiencing a power outage in light of the high winds in Southern California, you won’t be able to open or close your garage door without a garage door opener with battery backup installed.

Today, we wanted to take a moment to share some information on the current power outages, the benefits of installing a battery backup, and the importance of preparing for evacuation.

Power Outages, 2019

In light of the dry weather and high winds, power companies have been shutting power off to a wide range of homes and businesses throughout Ventura County and Los Angeles County.

According to PowerOutage.us, there are currently 1,784 outages in Ventura County and 6,007 outages in Los Angeles County. This may help prevent new fires from starting due to electrical lines, but it can pose new problems for homeowners and business owners alike.

Your garage door opener needs electricity to operate properly – without power, you won’t be able to open or close your garage door.

This is why it’s important and legally required to have a garage door opener with battery backup installed.

What’s a Garage Door Opener Battery Backup?

A backup battery ensures your garage door will open and close during times of power outages, which can be important if you need to evacuate and can’t open your garage door manually.

Your Garage Door Guys offers the latest LiftMaster garage door openers equipped with battery backups.

Sen. Bill Dodd proposed newly sold or installed garage door openers for residential properties in California should be equipped with backup batteries as a matter of public safety. The law was signed into effect on September 21, 2018, and required all garage door openers sold or installed as of July 1, 2019, to be equipped with a backup battery.

“Most people don’t think about this until it is too late,” Dodd said during a statement. “My goal with this bill is to raise awareness and give people the security of a battery backup.” – Sen. Bill Dodd

A garage door opener backup battery ensures your garage door opener operates in the event of a power outage. This allows you to get out of your garage during an emergency accompanied by a power outage.

Installation

As mentioned, new garage door openers should be equipped with a backup battery. If you have an older garage door, however, we encourage you to consider installing a backup battery or updating your opener to a modern garage door opener.

It’s just a matter of safety.

Garage doors are heavy, which can result in personal injury if you’re not careful while trying to escape your house during an emergency. A battery backup remedies this by providing the garage door opener power during a power outage.

Your Garage Door Guys Can Help

If you’re interested in improving the safety of your garage door, please give us a call. We will be happy to explain how battery backups work, provide an estimate, and provide garage door opener installation for you.

I recommend them highly

YGDG owner Brent, who is very personable and easy to talk to, offered a straight forward deal at a competitive price. Adrian, the technician who came to install the door was highly skilled at his job. He installed the door rapidly with no wasted motions or hesitations. I recommend them highly.

Cyrus M.

Prompt, courteous and very professional!

I have to say , Brent and company are my go to guys when it comes to fixing my doors. They are prompt, courteous and very professional! Brent always makes sure to go the extra mile and he fixes things right the first time.

Jose H.

Prices were very fair

Justin and Brent came to fix our garage door which would leak in water regardless of heavy rain or small showers. Prices were very fair and they also completed maintenance on our door — soooo much quieter now! On top of that, they came within time window and I could tell that they try hard to come…

Jennifer W.

Provided excellent, skilled service on my garage door

This company has consistently provided excellent, skilled service on my garage door issues through the years, at reasonable prices. I highly recommend them.

Carol K.

Very professional, on time and easy to work with

Brent and his team did an excellent job in the installation of my boss’ gate opener. They were very professional, on time and easy to work with. Thanks so much Brent!

John T.

The post Power Outages and Garage Door Safety appeared first on Your Garage Door Guys.

Damaged Garage Door

A garage door may work perfectly well for months and would not have any trouble. However, there might be times when you try to park your car or take it out of the garage, and the door would not open or close properly. In either case, your damaged garage door would need a repair service to secure your vehicle from theft or other damages.

Causes of damaged garage door

There are numerous reasons which may cause damage to the garage door. Therefore, the quicker these are identified the quicker they will be fixed.

1. Track alignment problem

   Garage doors run on tracks to open and close. If the garage door is not opening or closing properly, it might be due to a problem in the alignment of tracks, which may make the garage door go off track. Correcting the alignment of the tracks would resolve the issue making the door would run smoothly again.

2. Malfunctioning of parts

   A garage door may not stop moving smoothly if the parts of the door like rollers, hinges, and springs wear and tear due to excessive use and dust. The damaged parts if replaced would make the garage door work correctly.

3. Breakage of spring

   Springs stretch every time you open or close the door. The more you use the door, the more they work. As a result, springs have more chances of breaking than any other part.

4. Breakage of cable 

A cable that lifts the garage door becomes weak with time. Subsequently, a weak cable can break any time and make the garage door difficult to operate.

When you fear that your garage door is not functioning correctly, look for the causes of a damaged garage door. The team at Garage Door Doctor can visit your door and fix any issue your garage door may be having. All you need to do is call us on 281-855-9300 or 281-578-7659.

The post Damaged Garage Door appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/damaged-garage-door

How To Repair Garage Door Sensors

If you find your garage door isn’t opening or closing, the first thing you want to check is the garage door sensors. These will be located at the foot of either side of your garage door and may fall out of alignment, collect dust, or break over time.

In this article, you’ll learn how to repair garage door sensors so you can get your garage door back up and running quickly.

How To Repair Garage Door Sensors

There are several steps involved in repairing garage door sensors.

The first couple of steps involve inspects, so we’ll start there in order to determine if there’s a problem in need of repair or if the sensors simple need cleaning or realignment. You should be able to work through these steps pretty quickly, so let’s get to it …

Here’s how to repair garage door sensors quickly.

1. Clean the Sensors

Your sensors are two photo-eye lenses, mounted at the bottom of the garage door on both sides. They help sense anything that’s in the way, but they’re also in the worst spot when it comes to dust and dirt. It can build up over time and block the lens entirely.

If you’re having problems with the sensors, the first thing you should do is clean them off. Take a soft cloth and wipe off any dirt you see on the lenses. In most cases, this will be enough to get it working again. 

2. Look for damage

Being located at the bottom of the door, your sensors are also vulnerable to damage. They can easily be hit by a car, or by someone simply walking by and accidentally kicking it. Take a look to see if there’s any damage. If so, they may need to be replaced.

3. Realign the sensors

If cleaning the sensors didn’t work, they may need to be realigned.

This is another simple job you can handle yourself, should you need to. On some models, you’ll see that there’s a light that blinks if it’s not in alignment. Keep a lookout for this, and you’ll be able to correct it.

Loosen the nut or screw that’s holding the sensor in place, and then tie a piece of string to both sensors. Lay a spirit level over this, and check if it’s level. If not, adjust the sensor until it is level with the other one, and then secure it back into position. Test the door again before finishing up.

Related: How to Align Garage Door Sensors

4. Check the power

This is a very obvious step, but it’s important to check that the sensors are getting power.

If they aren’t, they aren’t going to work. Take a look at your sensors and see if any lights are showing on them. If not, they may not be properly plugged in or drawing power.

5. Check the wires

If the sensors are properly plugged into power, it may be the wires that are at fault. It’s important that you check they aren’t frayed or damaged.

If they are, replace them as soon as possible. As well as stopping your door from working, they’re also a potential fire risk.

6. Replace the units

If nothing else works, then it’s time to replace the units themselves. Sometimes parts break down or become faulty, so they’ll need to be replaced.

If you’re confident at DIY, you can replace them yourself. You’ll need to take the old sensors off the door, clipping them away from the wiring connecting them to the power. Attach your new sensors into those spots, reattaching the wires as you do so. Before you tighten them fully, align them as described above.

Once you’re happy with the positioning, screw them into place and test the door.

The Importance of Garage Door Sensors

What is the purpose of your sensors?

Their primary use is for safety. With an automatic door, you’ll push a button to open it, drive your car through, and then the door will close behind you.

The sensor comes into play if anything remains under the door when it tries to close. If there is anything, the door will reverse and open again, until the obstruction is removed. It prevents damage to your car and keeps the whole family safe when using the garage.

In the past, these sensors were mechanical and would reverse the door when the door touched the sensor physically.

These days, you’re much more likely to use a photoelectric eye as your sensor. In fact, these were made a legal requirement in 1993. These sensors have a beam that’s fired across the bottom of your doorway.

If anything breaks that beam, the system will not allow your door to shut until it has been removed.

A Note On Safety

Even if you’re simply looking to learn how to repair garage door sensors, it’s should be noted that working on any part of a garage door can be dangerous. Garage doors involve many moving parts, heavy equipment, and electrical components, so always approach the garage door with caution.

Before you attempt any repair on your garage door, it’s vital that you turn off the power to the door while you work on it.

You can usually do that on the garage door opener itself, so you won’t have to worry about the door closing on you while you’re working on it. If you’re not sure how to do this, you could turn off power to the garage itself at your circuit breaker.

Maintaining Your Garage Door Sensors

Once you’ve got your garage door sensors working again, you’ll want to ensure that they’re in top working condition from now on.

It’s best to include them in a regular all over garage door check, to see how they’re doing. At this point, you can spot any damage, and clean the eyes off to keep them clear and unobstructed. Doing this will ensure that you have fewer breakdowns and issues with the sensors, saving you money in the long run. Get into the habit of doing this, and you’ll find everything runs a lot smoother.

Fixing your garage door sensors is much easier than it looks. Often, all you’ll need to do is clean off the lenses or realign the sensors when needed. Even if they need to be replaced, it’s not too difficult to do. If you need help, you can always call an engineer to take a look for you.

Conclusion

Now that you know how to repair garage door sensors, you can work through each step and check to see if the problem was related to your sensors.

If you find the problem isn’t related to your garage door sensors, you may need to call a local garage door repair company. A professional repair service will provide a garage door inspection and offer an estimate for the required parts and repairs.

In most cases, the garage door sensors simply need to be cleaned or aligned. However, this may not be the case if your sensors are on the older side, weren’t installed properly, or need to be replaced due to damaged equipment.

If you’re in our service area, please consider making us Your Garage Door Guys.

The post How To Repair Garage Door Sensors appeared first on Your Garage Door Guys.