Replacing a Garage Door Lift Cable

It is nice to have a strong garage door, but what’s the point of having one when it does not open. A garage door lift cable helps to open and close a garage door. There could be a possibility of it damaging with time. This can lead to the overhead garage door not functioning properly. In such a case, the replacement of the lift cable is the way to go.

Replacement Procedure

It is good to read about the replacement procedure before a person hires a company to replace the garage door lift cable. There are many guides available on replacing the cable. A person can also replace the cord himself. However, to avoid any difficult situation, a professional who is an expert at replacing the cable would be recommended. Since there can be complications, therefore, the person should wear safety equipment while using the correct tools. If a person does not take care of the safety while replacing the cable, then it may lead to an injury in case of a mishap.

Equipment

There are a few types of equipment that come in use when replacing the garage door lift cable. Analyze the size of the door and know the different sizes of equipment that will come in need. These equipment include a winding bar, eyewear, grips, gloves, sockets of various fittings, wrenches of different sizes, and the essential material, a right replacement cable. The cable’s length would also depend upon the size of the door.

If at any point in the work, a person feels like the work needs way more effort, it’s advisable to call a local professional like Garage Door Doctor. After the replacement of the lift cable, sit back and enjoy looking at the garage door, which functions correctly. For more information on garage door repair, call us on 281-855-9300 and 281-578-7659.

The post Replacing a Garage Door Lift Cable appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/replacing-a-garage-door-lift-cable

Getting a Garage Door Repair Cost Estimate

Is your garage door broken? If so, you’re probably wondering how to get a garage door repair cost estimate.

In this article, we’re going to share a few tips to help you get started so you can get your garage door back up and running as quickly as possible.

Garage Door Repair Cost Estimate

Has your garage door suffered damage? There are all kinds of things that can damage it, from bad weather to an accident with a car driving into it. Whatever happened, you need it repaired. How do you get the best garage door repair cost estimate?

Here’s how to get a garage door repair cost estimate.

The first thing you’ll need to do is call on a local garage door repair company to come and help you with your garage door. If you want to shop around, you’ll need to call several and see what they’re quoting.

Not sure who to go with?

Firstly, ensure you’re narrowing your search down to people who can help with commercial garage doors. Next, try asking around your friends, family, and business partners. Some may be able to recommend a service they’ve used in the past. If you’re not able to do that, check out your local businesses on the Better Business Bureau site. This will be able to tell which companies are the best, without any bias.

When you call around, you’re looking for a company that will come and performs a garage door inspection. Some companies will give you an estimate on the phone, but they will need to come and take a look at the damage for themselves. This gives them a better idea of what needs to be done, and therefore give you a more accurate price.

If you can, call around several different companies and have them take a look at the door. This way, you’ll get a range of prices, and feel for the company themselves. Remember, you’re not just looking for the cheapest service. Look for the one that comes with the right expertise and insurance to work on your garage doors. Once you’ve decided, call your chosen company and book them to come and do the repair.

Minor Garage Door Problems

If the garage door is damaged, you may assume that you need to call an expert as soon as possible. In fact, you may be able to fix the problem yourself. Here are some issues that you can correct yourself without calling an expert.

Removing Garage Door Dents

Dents in metal garage doors are common, and nothing to seriously worry about.

If you have a small dent thanks to hail or an accidental foot on the gas pedal, you can hammer it out yourself. You’ll just need a rubber mallet and a piece of wood. Place the wood on the inside of the dent, where it’s bulging outwards. Tap the mallet against it until the dent is hammered out.

If the dent is too big or won’t hammer out, this is when you’ll need to call an expert.

Unresponsive Garage Door Remotes

If you have an automated garage door, then you’ll know that sometimes they just won’t work with your garage door remotes. There are all kinds of reasons why this could be happening, so try these fixes before calling for help:

• Change the batteries in the remote. Often they’ve simply run out, so new batteries will fix the problem.
• Check the garage door hasn’t been locked manually, which will stop the garage door opener from being able to work.
• Check the disconnect switch hasn’t been pulled. This may have happened if someone has been doing maintenance on the door recently.
• Try changing the codes on the remote. In older models, you can do this manually by flipping switches in the remote, while newer ones will allow you to set them automatically. Check your manual for details.
• Check you’re not trying to use the remote from too far away. They have a limited range, so they won’t work if they’re not close to the door.

Bent Garage Door Tracks

The tracks are what your door runs on when it opens and closes.

If you’re finding the door is squealing when you open and close it, there could well be a bend in the track. If it’s a small bend, you can fix this yourself. Find where the damage has occurred, and unscrew the track from the door itself. Again, using wood and a mallet, hammer the dent out until it’s straight again. Screw the track back in, and test the door. If it moves smoothly, you’re good to go.

Remember, if the bend is too great, you shouldn’t try and fix it yourself. If it’s a large dent, or the door is stuck because there’s a serious dent, you’ll need to get help with it.

Auto Reversing Door

Your garage door should have an auto-reverse feature. This stops the door from shutting on anything in its path, be it a person or a vehicle. It’s an essential safety feature, so you want to ensure it’s working properly. Are you finding that the door opens back up before it touches the floor, even if nothing’s in the way? This can easily be fixed.

The system works by using two photo eye beams on either side of the bottom of the door. These shoot out a beam that meets in the middle. If the beam is interrupted, then the door won’t close. The most likely reason it isn’t working is that the eyes are dirty. A soft cloth is all you need to clean them and try the door again.

If that doesn’t work, the eyes are likely out of alignment. Tie a piece of string between them, and measure it with a spirit level. If it isn’t level, then you’ll need to adjust them. Move the eyes until they’re in alignment with each other, and try again. This should solve the problem.

Conclusion

With these tips, you’ll be able to fix the most common problems with your commercial garage door. If the job is too big for you, or you’re not sure how to go about fixing it, then call in the experts. Call several companies, ask for recommendations, and pick a service that comes to check out the damage for you.

If you need help with your garage door repair, we’re Your Garage Door Guys and we’d be happy to help.

The post Getting a Garage Door Repair Cost Estimate appeared first on Your Garage Door Guys.

Commercial Driveway Gates & Openers

If you want to increase the security of your commercial property, commercial driveway gates and openers will help you do just that.

In this article, we’re taking a closer look at commercial driveway gates and openers so you can make a more informed decision regarding which type of driveway gate is best for your business.

Commercial Driveway Gates & Openers

If you have a business with a parking lot, garage, or storage space, you may be interested in the benefits of commercial driveway gates. Similar to the way a garage door work, a driveway gate opens and closes by remote. This provides convenience, efficient operation, and increased security.

There is a variety of different types of driveway gates and gate openers available for businesses today. Unlike automatic driveway gates for residential properties, these types of gates and openers are designed for high-traffic areas, like parking garages, lots, and other facilities.

Here’s an overview of a few things to keep in mind while looking for commercial driveway gates and openers.

Finding the Right Gate for Your Business

There are a few things to consider when searching for the right gate and opener for your commercial property. Unlike selecting a gate for a residential property, there’s more to consider than the design and operation function.

You’re going to have vehicles driving in and out of the gate every day. You’ll have much larger vehicles coming in too. Then there’s the issue of security. You’ve got potentially thousands of dollars worth of stock and equipment on-site, so of course, you want to protect it.

Types of Gate Openers

There is a wide variety of commercial driveway gate openers designed for commercial installations. As mentioned above, the needs and type of your business will determine which type of gate and gate opener is right for you.

Here’s a quick overview of some of the different types of gate openers available.

1. Swing Gate Openers

Though swing gates are often used for residential installations due to the amount of space required to operate properly, swing gate openers will power a swing gate with ease so your traffic can keep moving.

2. Slide Gate Openers

The slide gate opener is one of the most popular and widely-used type of gate opener due to its compact size and exceptional performance. These units sit at the base of the fence line, efficiently saving space and powering your gate.

3. Overhead Gate Opener

An overhead gate opener is engineered to increase up-time and provide the most reliable performance available. These heavy-duty gate openers are designed to handle frequent use for commercial buildings in need of dependable performance.

4. Barrier Gate Openers

A barrier gate is ideal for high-traffic areas, like parking garages and parking lots. These are light-weight and open and close quickly, reducing the amount of time it takes for traffic to pass through.

5. Manual Lift & Swing Gates

Similar to barrier gates a manual lift or swing gate is light-weight and operated manually. This makes them ideal for installations like airports, checkpoints, and guarded parking areas.

Gate Automation

The next thing you need to consider is the automation of your gate. Depending on how busy your property is, this is going to be essential. With a manual gate, drivers will need to get out of their vehicle and open the gate to drive through, and then close it behind them. If there’s a lot of people coming in and out, that’s going to eat up a lot of time. Some businesses with swing gates simply leave them open during business hours, which can reduce security.

The best thing to do is automate your gate. This allows drivers to come in and out of the gate, without having to get out of their vehicles. It saves a lot of time and effort on their part.

There are several ways you can automate your gate. One option is to use remotes to open the gate. These work when the button is pushed near the gate, opening it. These are a good option if you have a relatively small crew or regular drivers. You can give remotes to those who need them, so you know who has access to the gate at all times.

Another popular option is to use a keypad. The keypad will only let the gate open if the driver has the right code. This works very much like the remotes, in that you can give the code to whoever needs it. The benefit is you don’t need a physical remote to get in, so you can give the code to whoever needs it. You can also change the code out whenever you need to, to keep it secure.

If you’ll have lots of new drivers coming in and out and have the staff to manage this, you can use an intercom system on the gate. Have drivers announce themselves at the gate, and you can open the gate remotely if you want to let them in. This is a very secure option as you can very everyone before they come inside.

Power Supply Options

If you choose to add automation to your gate, you’ll need to consider whether you want the gate hooked up to the electrics on your property, or to use solar power to power it. Both have their advantages.

Hooking your gate up to the electrics means you’ll have a steady supply of power, and you won’t have to worry about it not working. Even if the power goes out, a backup battery will ensure you’re not much inside.

A solar-powered gate is another good option. The solar panel can be placed almost anywhere, as long as it can get direct sunlight. Again, a battery backup will ensure you have power to the gate, even when the sun goes down. Plus, having a solar panel means less work on your property, as you won’t have to have the ground dug up to connect electrics

Security

One of the most important reasons to install a driveway gate is to secure your business when you’re not there. A locked gate is another layer of security, and it helps delay and put off potential trespassers. When you add the gate to security lighting, alarms, and more, you know you’re doing your best to keep unwanted people out when you’re not there.

This is another reason why adding automation is such a good idea. When the gate is automated, it won’t just open to anyone. You need to give drivers permission in order to use it. That could mean giving them the code to the keypad or giving them a remote in order to open the gate. That way, you can track exactly who has access to the gate at all times.

Conclusion

Now that you know more about commercial driveway gates and openers, you can make a more informed decision regarding which options are right for your business.

When choosing a commercial gate, you’ve got a lot of options. You can choose the style of opening, and whether to automate it. There are several different ways to automate, as well as to power the automation, too. The choice is yours, so get the gate that works best for you.

If you need help with a commercial driveway gate, check out Your Garage Door Guys to learn more about our services, request an estimate, or schedule an appointment.

The post Commercial Driveway Gates & Openers appeared first on Your Garage Door Guys.

Sliding Garage Door- A Reliable Choice

A sliding garage door is not the cheapest garage access option available, but it is undoubtedly one of the best, most reliable, and most comfortable systems to operate. It is the effortless and reliable doors you can have at your house. The following marks its importance:

Mechanism

A sliding garage door requires tracks and sprinters on which it moves to and fro to open and close the garage. It should have twin rollers at the bottom of the door in an adjusted floor rail. It allows the opening and closing actions of the garage to be smooth and easy. However, the ease is achievable only when the base is at an equal level too. The sliding levels should be strong so that they may not break with the intensity.

Slide up Garage Doors

A sliding garage door that has to be pushed up does not meddle with space before or behind the door’s limit. This style of sliding garage door offers an opening and shutting activity that is smooth and requires the least amount of physical exertion. It can also be mechanized and remotely controlled.

Side Sliding Garage Doors

The sliding garage doors can either be vertical or horizontal, depending upon the need of the owner. The side sliding sectional garage door offers favorable choices. These include the formation of garage roof space because the door opens to the side. One can utilize the whole roof of the garage and have quick access to it too. Side sliding garage sectional doors are an extraordinary answer to the simple problem of having to pull the door up.

By installing the sliding garage door, you can enjoy the opportunity of being free from the hassle of requiring extra space in your garage for opening and closing the door. Garage Door Doctor identifies your needs and makes sure to provide you the doors that would make your life comfortable. For further information call us on 281-855-9300 or 281-578-7659.

The post Sliding Garage Door- A Reliable Choice appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/sliding-garage-door-a-reliable-choice

8 Garage Door Issues (and How to Fix them)

There is a wide range of garage door issues that may prevent you from opening and closing your garage door. While some garage door issues require a professional garage door repair service, there are several you may be able to fix yourself.

In this article, you will discover eight common garage door issues and how to fix them.

Garage Door Issues and How to Fix them

Your garage door works hard, day in and day out. You’ll use it to get in and out of the garage all the time, so over time, it’s going to need some repair. Sometimes, it’s a minor thing that you can handle yourself, other times, you’re going to need to call your local garage door repair company.

We thought it would be helpful to explore a few common garage door issues as well as their solutions so you know if you should call a professional or fix the problem yourself.

Here are eight common garage door issues and how to fix them.

1. Squealing Garage Door

Is your garage door making all kinds of noises when you open and close it?

Whether it’s squealing or scraping, the noise is an indication that something is not right. Don’t worry, this is a problem you can handle yourself. It could be that the tracks your garage door travels on have dented or bent, so you’ll need to put them back into shape.

You’ll need to unscrew the tracks from their brackets and find the spot that’s bent out of shape. Then, simply tap it back into shape with a rubber mallet. If your attempts aren’t working, or the bend is too great for you to repair on your own, call a local repair company to help you.

2. Dented Garage Door

It’s so easy to dent a garage door.

A stray football, a hailstorm, or simply a foot slipping onto the accelerator pedal can all cause a dent in the door. If you have a steel or aluminum door, then you can easily tap a dent out. Using a piece of wood and a mallet, simply place the wood over the dent and tap it to set the metal back into place.

If you’re unable to fix the dent yourself, contact a professional about replacing the damaged garage door panels or installing a new garage door.

Further reading:

• How to Fix A Bent Garage Door Panel

3. Garage Door Opener Doesn’t Work

There are multiple reasons why your garage door opener may not be working.

The first thing you should check is the batteries, as the batteries in the opener may be dead, or the connections corroded. Next, check to see the door hasn’t been locked manually. If this doesn’t work, you may find the opener has been unplugged, or the disconnect switch has been pulled.

Check all these things before talking to a professional.

Further reading:

• A Few Reasons Your Liftmaster Remote Isn’t Working

4. Garage Door Opens by Itself

Another garage door opener quirk is when it starts opening itself.

This is obviously concerning, as it’s a security issue for your home. If this is happening, don’t panic. It could actually be the fault of multiple garage door openers working on a similar frequency.

If this is happening, talk to your neighbors. Are they finding their garages won’t open when they press the button on their remote? It could be that the frequency is too similar to your home, so it’s opening yours instead. This is easily fixed, check your manual to see how to to change the radio frequency the opener works on.

Further reading:

• Reasons A Garage Door Opens by Itself

5. Auto-reversing Sensor Issues

The auto-reverse feature on your garage door is an important safety feature. If anything is in the way of the garage door, then it won’t shut on it. Instead, it’ll reverse back and open up until the obstruction is removed. This is good for the bodywork on your car and the safety of you and your family. You will need to find out what is causing the obstruction though, in order to correct it.

In most cases, there will be something obstructing the door, so simply remove it to correct the issue. If that’s not the case, then it could be that the photo eyes need to be cleaned. Any dirt blocking them will interrupt the beam they put out, much like an obstruction would. If that doesn’t work, check that the photo eyes are aligned correctly.

Further reading:

• How to Tell if Garage Door Sensor is Bad
• How to Repair Garage Door Sensors
• How to Align Garage Door Sensors

6. Broken Springs

Your springs are what give the garage door tension and allow it to open and close. Are you finding that your garage door has lost its balance, or can’t stay open on its own? That’s a sign that the springs are starting to wear out.

If the springs are left for longer than this, then they will eventually break. If you’re home when they do, it sounds like a loud banging coming from your garage. This is the springs snapping and sometimes even flying away from the door with the force of it. There’s a lot of tension in those springs, so it’s unsafe to replace them yourself. Instead, your garage door will be best in the hands of a professional.

Further reading:

• How to Replace Garage Door Torsion Springs
• Garage Door Spring Repair

7. Bent or Broken Tracks

Above we noted how you can fix the tracks on your garage door if they’re slightly dented or bent.

If they’re badly bent, you shouldn’t attempt that repair yourself. The garage door is under a lot of pressure, and it’s a lot of weight to fall on you if it does go wrong. The same goes if your door has totally come off the track.

Further reading:

• How to Fix A Garage Door Off Track

8. Old Rollers

If you discover your garage door isn’t opening or closing smoothly, you may need to replace the rollers. Garage door rollers are the wheels that allow the garage door to move and down the track smoothly.

As your rollers age, they may need to be replaced depending on how well they were maintained. Fortunately, a professional will be able to provide and install new rollers for your garage door at an affordable cost.

Further reading:

• Garage Door Roller Replacement

9. Broken Cables

Garage doors open and close using cables that are pass through a pulley system, allowing your garage door to open and close with ease. Though they’re made of metal, garage door cables may become damaged and need replacement over time.

Operating a garage door with damaged cables is dangerous so it’s best to contact a professional for help if you notice a problem.

Learn more:

• Garage Door Cable Replacement

10. Garage Door Replacement

Garage doors get old and will eventually need to be replaced.

This is something you just shouldn’t try to DIY. A garage door is full of moving parts that need to be put together correctly, and this is difficult to do if you’re not an expert. It’s better to call a company to handle the whole job for you.

Learn more:

• New Garage Doors
• Garage Door Installation
• Request an Estimate
• Garage Door Replacement Cost Recouped During Resale

Conclusion

Now that you’re more familiar with some of the most common garage door issues and how to fix them, you can make a more informed decision regarding whether or not you need a professional to fix the problem at hand.

If, however, you’re still not sure why your garage door isn’t working properly, you may want to contact a professional garage door service provider located near you.

The post 8 Garage Door Issues (and How to Fix them) appeared first on Your Garage Door Guys.

Trouble Shooting Garage Doors & Openers

Are you having problems with your garage door or garage door opener?

Discovering your garage door isn’t working properly can be frustrating, but there are a few things that will help you identify and fix the problem before calling a local garage door repair service.

In this article, you will learn what to check when trouble shooting garage doors and openers.

Trouble Shooting Garage Doors & Openers

There are several important parts that power your garage door. You have the power supply, the garage door opener, sensors, and remote to mention a few. The more you understand how your garage door works, the faster you will be able to troubleshoot a garage door or garage door opener problem.

To help you get started, we’re exploring several of the most common sources of problems.

Here are some tips to consider when trouble shooting garage doors and openers.

1. Check the Batteries

This is the very first thing you should do when you’re troubleshooting your garage door remotes. If you find the remote isn’t doing anything when you press the button, open it up and check the batteries. That sounds so obvious that most people wouldn’t even think to do it. This is especially true if you replaced the batteries recently. There’s no telling if the batteries were fully charged, so always check.

Change out the batteries and try the remote again. If that doesn’t work, take a look at the contacts. If they’ve started to rust, polish them and try the remote again. This will solve most problems with your opener.

Related: How to Change Battery in Liftmaster Garage Door Opener Keypad

2. Unlock the Garage Door

This is another very simple solution if the door isn’t opening when you use your remote. The remote itself may be fine, and the door is simply manually locked. Check the lock for yourself, and see if it was locked up before you came to use the door. If so, just unlock it and it should work as it should.

3. Check with Your Neighbors

Are you finding that your garage door is opening and closing when you’re not trying to use it? Alternatively, is your remote not working with your door? It may be time to talk to your neighbors.

Most garage door remotes work on radio wavelengths, and yours should be on a specific wavelength to you. That means only your remote should open your door. Sometimes though, neighbors get garage door openers that are on very similar wavelengths. That means when they go to open their door, they actually open someone else’s instead. Chat to your neighbors to see if this is happening. If it is, the wavelength can be changed to stop it happening again.

4. Realign the Sensor

If the garage door isn’t closing, your sensor may have fallen out of alignment. A garage door sensor consists of two units mounted at the foot of either side of your garage door. These units need to be aligned in a way that allows the invisible beam to connect between either unit.

A small nudge can force your sensors out of alignment, which then prevents the beam from connecting across the length of your garage. If you notice one or both of the sensor units look like they’re pointing upward or downward, you can try adjusting them so they look like they’re pointing at each other. In most cases, this should reconnect the beam but it depends on their position. If, for example, the sensors weren’t installed properly, you may need to reinstall them correctly.

To realign them, tie a string between the two eyes. If it’s not level, then they need to be adjusted. This is done by unscrewing one of the eyes slightly, and moving it until the string is level. You can check this using a spirit level. Once it is, tighten the screws back up and the eyes should be realigned.

Related: How to Align Garage Door Sensors

5. Clean the Garage Door Photo Eye

Are you finding that the garage door is lowering slightly, and then reversing back up before it touches the ground? You may find that it’s doing this because the photo eyes think your doorway is blocked. This is the auto-reverse feature, and it’s there to keep you and your family safe. If the photo eyes are blocked though, they won’t let the door shut even if you want it to.

Get down and check your photo eyes. It’s very easy for dirt to get onto them and block them. Use a soft cloth to clean them off, and try it again.

6. Adjust the Garage Door

Is your door making a rubbing or squealing noises when you open and close it? Can you see gaps between the track and the door itself? If so, the door is out of alignment with the track. If it’s still able to be operated you can fix it yourself, but you’ll want to do it ASAP. The longer you leave this problem, the worse and potentially more dangerous it gets.

Loosen the screws that hold your track to the frame. Then, find the section that’s bent and out of alignment. You can use a rubber mallet to gently tap the track back into place. Use a spirit level again to ensure that the track is totally level.

If the door won’t open at all, then you’ll need to look into calling a professional to handle the repair, as doing it yourself could be dangerous.

Related: How to Adjust a Garage Door

7. Change the Springs

Is your door suddenly just not working? Maybe you heard a loud crash in your garage, and now the door won’t work. If this is the case, then you may find the springs have broken on your door.

These springs are a vital part of your machine. They provide the tension needed for your door to be able to open and close. They wear out over time though, and eventually, they will stretch out and break. When they break, that means that your door won’t be able to open without them.

Check your springs and see if they’re stretched or broken. If they are, don’t attempt to repair them yourself. Springs are highly dangerous, so instead call a professional to help you with this.

Related: How to Replace Garage Door Torsion Springs

8. Flip the Disconnect Switch

When you press the button to open your door, do you hear the motor running even when the door doesn’t open? If the motor runs for the amount of time the door would take to open and then switches off, it’s likely the disconnect switch was flipped.

This switch is designed to disconnect your garage door from the opener, allowing you to open it in the event of a power cut. The switch is usually attached to a string, and so is easily flipped on. If you find the disconnect has been flipped on, flip the switch again in order to get your opener working.

These are some of the most common trouble shooting tips you’ll need for your garage door and opener. Many times, you’ll find the issue is very simple. If you’re ever unsure though, ensure you call an expert to help you out with your door.

Conclusion

Now that you have a better understanding of your garage door, you can rest assured you know where to look first when trouble shooting garage doors and openers.

If you aren’t able to identify the problem, it’s best to contact a garage door repair service sooner than later.

The post Trouble Shooting Garage Doors & Openers appeared first on Your Garage Door Guys.

What affects a Garage Door Weight?

A garage door can either be manual or automatic. If you have an automated door, a switch or a remote would regulate it. For an automatic garage door, the lift of the weight is subject to the horsepower of the garage door opener. A half of horsepower can lift roughly around 300 pounds. This is the average load of a two-vehicle steel door, and a one horsepower door opener can, without much of a stretch, lift roughly 400 pounds.

The weight is subject to numerous factors, but there is no ideal garage door weight. The factors may include the doorway size, insulation or protection, material, doorway thickness, the amount of steel in use, the type of door installed, and so forth. A wooden door will have a different weight than a roll-up garage door weight.

Wood garage door weight 

The kind of wood in use for the door matters a great deal just as the style. Wooden garage doors are typically heavier and retain water when it is raining, signifying 50 extra pounds to their weight.

Glass Doors

The contemporary glass garage doors are the ideal improvement to one’s home’s glass scopes and yards. They delightfully meld the indoor and outside spaces. Along with low up keeping, they retain every climate condition. Glass doors being the heaviest increase the garage door weight to 400 pounds.

Insulations

Since the garage door weight is also dependent upon the insulation or protection brought in use, therefore, it becomes necessary to bring it into consideration. For a standard 16×7 garage door, the weight may be around 150 pounds. But with the insulation or protection, the weight of the garage door increases. Protection can weigh about 25 pounds. When we include the weight of the back steel, the weight of the door increases by another 30 pounds. This eventually increases the weight of the garage door to 205 pounds.

However, the type of garage door you intend to install brings a change in the weight. Garage Door Doctor has experts who can guide you on how much weight should be of a garage door so it would work effectively with the right balance. If you are interested in more information, you can call us on 281-855-9300 or 281-578-7659

The post What affects a Garage Door Weight? appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/what-affects-a-garage-door-weight

How to Reset Clicker Garage Door Keypad without Code

Keyless entry options for your garage door are a great invention. You’ll never have to get out of your car in the rain or snow again, just to open the door.

With a few presses of a button, you’ll be indoors where it’s warm and dry. However, sometimes you’ll need to change the code or use a new remote, and that’s where things get difficult. Maybe you forgot the code, or you moved into a new home and don’t have the code.

In this article, we’ll show you how to reset clicker garage door keypad without code.

Getting Started

You’re stuck outside of your garage, and you need to know how to reset clicker garage door keypad without code. What do you do? Luckily, it’s quite simple to do.

You’ll need to get into your garage and reach the motor unit of the opener. This is usually located up high, so get a ladder to enable you to reach it. Once you’ve done this, locate the ‘learn’ button, usually located on the side of the unit. Hold the button until the light on the unit goes out. This indicates that the unit has forgotten the old code.

Once you’ve done this, you’ll need to press the ‘learn’ button again. This should bring the light on again. Once this has happened, go to the keypad and enter the code you want to use for the door from now on. The motor unit’s light should blink, to show it has accepted the new code.

Press the ‘learn’ button once more, and press a button on your remote. Once you’ve done this, the door should open for you. Repeat this step with all other remotes in the home, to ensure they can all open the door.

Here’s how to reset clicker garage door keypad without code …

How to Reset Clicker Garage Door Keypad Without Code

If you don’t have a keypad on your garage door, you can still reset the code so you can get into your garage. Take your remote and remove the cover, so you can see the inside of it. You’ll see there are some switches inside it that dictate the code that’s used to open your garage door. Move them as needed to create a new code. Make sure you do this for all of your garage door remotes.

Once you’ve done this, look at the garage door opener unit in your garage. There will be switches on this that will match the switches in the remote. Move these so these match the new codes in the remotes, and replace the covers back onto anything that you removed.

Once you’ve done this, test your remotes to see if they work. If they did, the door should open and close as normal.

Related: How to Change Battery in Liftmaster Garage Door Opener Keypad

Rolling Codes

If you have an older garage door and are worried about security in your home, you should look into getting a newer opener with rolling codes. These are the most modern way of using garage door openers and are a good way of keeping your garage safe.

These codes are ‘rolling’ as every time you press the button on your remote in order to get in, your opener will ‘roll’ the codes. This means the codes will change every time you use it. Because of this, only your remote should work on the door. This stops anyone from coming within the distance of your door and trying to capture the codes themselves.

Other Garage Door Opening Options

If you don’t want to worry about clickers for your garage door, you could look into getting a keypad for entry. These sit by the side of the door and require the correct code to be put in before the garage door will open. These are perfect if you’re worried about security, as they can only be opened by someone who knows the code. You also won’t have to worry about finding your clicker when you come home. As long as you know the code, you’ll be able to get in.

Keypads are also great for children, as it gives them a safe way of opening the garage door without having to give them keys. If you’re worried about them losing keys to your home, a keypad is a great way around this.

Common Garage Door Opener Repairs

Having to reset your clicker is one thing that you may have to do when you move to a new home or have problems with your opener. Here are some other issues you may have with your opener, and how you can easily fix them.

The door keeps auto-reversing: Is your door auto-reversing when you’re trying to close it? It could be that there’s something blocking the photo-eye. These eyes sit at either side of the door near the ground, and they can easily get blocked, knocked out of place, and covered in dirt. Realign your photo eyes and clean them off, and your door should start working again.

Remote won’t work: There are several reasons why your remote won’t work. Firstly and most commonly, you’ll see that the batteries have died, so they’ll just need to be changed out. If the contacts have corroded, you can polish them in order to make them work again. Sometimes you’ll find the door has been locked manually, so check for that too.

The door opens when you don’t want it to: Are you getting the opposite problem, that your garage door is opening and closing seemingly on its own? There’s actually a simple explanation. A neighbor’s garage door opener is probably on the same frequency, and when they hit their remote it’s opening your door. Talk to your neighbors to see what’s causing this.

It’s actually very simple to reset the code on the garage door clicker when you don’t have the existing code. As long as you have access to the garage door opener motor, you can change it. It’s an easy process and once it’s done you’ll be able to get in and out of your garage with ease.

The post How to Reset Clicker Garage Door Keypad without Code appeared first on Your Garage Door Guys.

Rolling Garage Doors: Securing Your Business

As a business owner, it’s important that your business operates smoothly and effectively. Whether you run a business that involves some type of storefront, garage, storage, or parking, you may find rolling garage doors offer the function you need to ensure your business has the security it needs when you’re not there.

In this article, we’re taking a closer look at how rolling garage doors benefit business owners of all types.

Rolling Garage Doors and Your Business

As a business owner, you’re always thinking about so many things at once. You’ve got to stay on top of everything, and that means you’re looking for ways to make your job easier. Have you considered changing out your garage doors? Rolling garage doors will bring all kinds of benefits to your business, and make things a lot easier for you. Here’s why you should consider changing your doors.

What Is A Rolling Garage Door?

As a business or homeowner, you’ll be familiar with other styles of garage doors. There are the up and over style, which is the most common style you’ll find on most garages. There are also swinging styles that are becoming popular too, thanks to the aesthetics of them. The rolling garage door is a style designed for business owners and is perfect for any business premises.

These garage doors open by rolling up onto a spool at the top of the door opening. It rolls up a track, and when it’s open it sits coiled around that spool. When the door needs to shut again, it will simply roll back down the tracks and shut the garage.

Saving Space In Your Garages

The main benefit of using a rolling garage door in your garage is that it saves so much space. As it only takes up a small amount of room at the top of the door, it’s going to leave you a lot more space to store items. Regular doors, such as an up and over door, will need more room so that will leave you less space overall.

Most businesses know that space is always at a premium. It’s amazing how much space you need, whether it be for tools, equipment, stock, or anything else that you may need. Having that extra space in your garage is going to be a real boon. If you use your garages mainly for storage, then you really do need to consider a rolling garage door.

More Space For Parking

The space-saving doesn’t just happen inside the garage with rolling garage doors. You’ll also see that you can park your cars as close as you can to rolling doors, without worrying about having space to open them. This is something that’s vital in a busy business parking lot. If you’re always getting cars and trucks coming in and out, then you’ll need all the space you can get to accommodate them.

Having that space is also helpful when you’re thinking about parking, for both staff and customers. It’s so much easier for staff when they can get parked on site. They don’t have to worry about getting parked near work, so they will appreciate being able to always get a space. Customers will also appreciate having the extra space for parking. Having that space makes it easier for them to come to your business, increasing revenue.

Fit To Any Door Space

When buying a garage door, you’ll often find that you’re limited by the style you choose. Up and over and swing doors often need a specific size opening to work. As a busy business owner, you don’t want to be spending time trying to find the right garage door for your garages.

That’s why rolling garage doors are such a boon to business owners. You’ll be able to fit a garage door to almost any opening you need. That’s any size openings, any height, and even archways and other less than regular shapes. You can order rolling garage doors for your business and it will be easier to get them installed.

Ease Of Operation

Once you have your garage door installed, everyone on your staff will need to know how to operate the door. The more moving parts that the door has, the more complicated it will be to open. If you want everyone to get the hang of the door easily, then you’ll need to get a garage door. These are so simple that it’s very easy to get to grips with it.

As they’re so easy to use, that’s one more job off your plate as the owner. Show everyone how to use the door once, and you won’t have to worry about a thing. You’ll save even more time if you decide to automate the door. All your staff will need to do is press a button and the door will open.

On the subject of ease of use, you should know that a rolling garage door is very easy to maintain. You’ll never have to worry about the door breaking down if you have it serviced annually and take care of it.

Extra Security For Your Business

You’re always going to be concerned about your business’s security. You want to do your best to keep it safe and secure from thieves and criminals. One of the best ways you can secure your business is by installing a rolling garage door.

Installing any new garage door will improve your security, as a new door is made to the most up to date manufacturing standards. A rolling garage door is especially secure though, as they are a simple design that offers no easy entry to anyone trying to get in. As they’re metal it’s very difficult to break the door itself. If you automate the door, then it will be even harder to get in. No one will be able to get a door open without a keypad code or remote that uses the right rolling codes.

If you team up your garage doors with other security measures, such as security lights and cameras, then you will have peace of mind that your garages and business is safe.

There are so many reasons why rolling garage doors are the best choice for any business. They’re easy to fit to any door opening, so there’s no worry about getting them fitted. They’re secure, they take up very little space, and they’re easy to use. Look into having a rolling garage door fitted at your business today.

The post Rolling Garage Doors: Securing Your Business appeared first on Your Garage Door Guys.

Has your garage door spring broken? Here’s what you can do.

A working garage door helps in the smooth functioning of several activities performed during a busy day. However, when you all of a sudden, find a garage door spring broken, it leaves you with two options. Either you park your car outside at an unsafe place and continue with your work, or you stop your work and get the broken spring fixed.

The latter is a sensible option that would also reduce the risk of damaging the car. A professional garage door repair service will help you solve the problem.

But let’s first discuss what does a garage door spring does?

A garage door spring plays an essential part in the opening and closing of the garage door. Without a spring, the movement of the door would become hard, and it would be much difficult to lift the door. Therefore, if you see a garage door spring broken, it is good to get it fixed before it starts spoiling the other parts of the door.

How to identify if the garage door spring has broken?

Before fixing the garage door spring, it is good to identify if the problem is with the spring or some other part that needs replacement or repair. You would notice the following signs if the garage door spring would break:

1. In the middle of the torsion spring, you might see a gap
2. With a broken spring the top of the garage door might bend
3. The door while shutting would fall quickly
4. The door denies opening when you pull the emergency rope
5. When one of the springs of the garage door breaks, it will give a jerk.
6. The most obvious sign of a spring breaking is cable hanging down.

The entire sync of the door gets disturbed if you would have a garage door spring broken. Therefore, it is good not to let the spring break. Rust and poor maintenance can be some of the reasons due to which the springs break. A professional garage door repair would help to replace the broken spring so that the door would function smoothly again. In case you need any help, call Garage Door Doctor, and our team will help you fix the door.

The post Has your garage door spring broken? Here’s what you can do. appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/has-your-garage-door-spring-broken-heres-what-you-can-do

Power Outages and Garage Door Safety

If you’re experiencing a power outage in light of the high winds in Southern California, you won’t be able to open or close your garage door without a garage door opener with battery backup installed.

Today, we wanted to take a moment to share some information on the current power outages, the benefits of installing a battery backup, and the importance of preparing for evacuation.

Power Outages, 2019

In light of the dry weather and high winds, power companies have been shutting power off to a wide range of homes and businesses throughout Ventura County and Los Angeles County.

According to PowerOutage.us, there are currently 1,784 outages in Ventura County and 6,007 outages in Los Angeles County. This may help prevent new fires from starting due to electrical lines, but it can pose new problems for homeowners and business owners alike.

Your garage door opener needs electricity to operate properly – without power, you won’t be able to open or close your garage door.

This is why it’s important and legally required to have a garage door opener with battery backup installed.

What’s a Garage Door Opener Battery Backup?

A backup battery ensures your garage door will open and close during times of power outages, which can be important if you need to evacuate and can’t open your garage door manually.

Your Garage Door Guys offers the latest LiftMaster garage door openers equipped with battery backups.

Sen. Bill Dodd proposed newly sold or installed garage door openers for residential properties in California should be equipped with backup batteries as a matter of public safety. The law was signed into effect on September 21, 2018, and required all garage door openers sold or installed as of July 1, 2019, to be equipped with a backup battery.

“Most people don’t think about this until it is too late,” Dodd said during a statement. “My goal with this bill is to raise awareness and give people the security of a battery backup.” – Sen. Bill Dodd

A garage door opener backup battery ensures your garage door opener operates in the event of a power outage. This allows you to get out of your garage during an emergency accompanied by a power outage.

Installation

As mentioned, new garage door openers should be equipped with a backup battery. If you have an older garage door, however, we encourage you to consider installing a backup battery or updating your opener to a modern garage door opener.

It’s just a matter of safety.

Garage doors are heavy, which can result in personal injury if you’re not careful while trying to escape your house during an emergency. A battery backup remedies this by providing the garage door opener power during a power outage.

Your Garage Door Guys Can Help

If you’re interested in improving the safety of your garage door, please give us a call. We will be happy to explain how battery backups work, provide an estimate, and provide garage door opener installation for you.

I recommend them highly

YGDG owner Brent, who is very personable and easy to talk to, offered a straight forward deal at a competitive price. Adrian, the technician who came to install the door was highly skilled at his job. He installed the door rapidly with no wasted motions or hesitations. I recommend them highly.

Cyrus M.

Prompt, courteous and very professional!

I have to say , Brent and company are my go to guys when it comes to fixing my doors. They are prompt, courteous and very professional! Brent always makes sure to go the extra mile and he fixes things right the first time.

Jose H.

Prices were very fair

Justin and Brent came to fix our garage door which would leak in water regardless of heavy rain or small showers. Prices were very fair and they also completed maintenance on our door — soooo much quieter now! On top of that, they came within time window and I could tell that they try hard to come…

Jennifer W.

Provided excellent, skilled service on my garage door

This company has consistently provided excellent, skilled service on my garage door issues through the years, at reasonable prices. I highly recommend them.

Carol K.

Very professional, on time and easy to work with

Brent and his team did an excellent job in the installation of my boss’ gate opener. They were very professional, on time and easy to work with. Thanks so much Brent!

John T.

The post Power Outages and Garage Door Safety appeared first on Your Garage Door Guys.

Damaged Garage Door

A garage door may work perfectly well for months and would not have any trouble. However, there might be times when you try to park your car or take it out of the garage, and the door would not open or close properly. In either case, your damaged garage door would need a repair service to secure your vehicle from theft or other damages.

Causes of damaged garage door

There are numerous reasons which may cause damage to the garage door. Therefore, the quicker these are identified the quicker they will be fixed.

1. Track alignment problem

   Garage doors run on tracks to open and close. If the garage door is not opening or closing properly, it might be due to a problem in the alignment of tracks, which may make the garage door go off track. Correcting the alignment of the tracks would resolve the issue making the door would run smoothly again.

2. Malfunctioning of parts

   A garage door may not stop moving smoothly if the parts of the door like rollers, hinges, and springs wear and tear due to excessive use and dust. The damaged parts if replaced would make the garage door work correctly.

3. Breakage of spring

   Springs stretch every time you open or close the door. The more you use the door, the more they work. As a result, springs have more chances of breaking than any other part.

4. Breakage of cable 

A cable that lifts the garage door becomes weak with time. Subsequently, a weak cable can break any time and make the garage door difficult to operate.

When you fear that your garage door is not functioning correctly, look for the causes of a damaged garage door. The team at Garage Door Doctor can visit your door and fix any issue your garage door may be having. All you need to do is call us on 281-855-9300 or 281-578-7659.

The post Damaged Garage Door appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/damaged-garage-door

How To Repair Garage Door Sensors

If you find your garage door isn’t opening or closing, the first thing you want to check is the garage door sensors. These will be located at the foot of either side of your garage door and may fall out of alignment, collect dust, or break over time.

In this article, you’ll learn how to repair garage door sensors so you can get your garage door back up and running quickly.

How To Repair Garage Door Sensors

There are several steps involved in repairing garage door sensors.

The first couple of steps involve inspects, so we’ll start there in order to determine if there’s a problem in need of repair or if the sensors simple need cleaning or realignment. You should be able to work through these steps pretty quickly, so let’s get to it …

Here’s how to repair garage door sensors quickly.

1. Clean the Sensors

Your sensors are two photo-eye lenses, mounted at the bottom of the garage door on both sides. They help sense anything that’s in the way, but they’re also in the worst spot when it comes to dust and dirt. It can build up over time and block the lens entirely.

If you’re having problems with the sensors, the first thing you should do is clean them off. Take a soft cloth and wipe off any dirt you see on the lenses. In most cases, this will be enough to get it working again. 

2. Look for damage

Being located at the bottom of the door, your sensors are also vulnerable to damage. They can easily be hit by a car, or by someone simply walking by and accidentally kicking it. Take a look to see if there’s any damage. If so, they may need to be replaced.

3. Realign the sensors

If cleaning the sensors didn’t work, they may need to be realigned.

This is another simple job you can handle yourself, should you need to. On some models, you’ll see that there’s a light that blinks if it’s not in alignment. Keep a lookout for this, and you’ll be able to correct it.

Loosen the nut or screw that’s holding the sensor in place, and then tie a piece of string to both sensors. Lay a spirit level over this, and check if it’s level. If not, adjust the sensor until it is level with the other one, and then secure it back into position. Test the door again before finishing up.

Related: How to Align Garage Door Sensors

4. Check the power

This is a very obvious step, but it’s important to check that the sensors are getting power.

If they aren’t, they aren’t going to work. Take a look at your sensors and see if any lights are showing on them. If not, they may not be properly plugged in or drawing power.

5. Check the wires

If the sensors are properly plugged into power, it may be the wires that are at fault. It’s important that you check they aren’t frayed or damaged.

If they are, replace them as soon as possible. As well as stopping your door from working, they’re also a potential fire risk.

6. Replace the units

If nothing else works, then it’s time to replace the units themselves. Sometimes parts break down or become faulty, so they’ll need to be replaced.

If you’re confident at DIY, you can replace them yourself. You’ll need to take the old sensors off the door, clipping them away from the wiring connecting them to the power. Attach your new sensors into those spots, reattaching the wires as you do so. Before you tighten them fully, align them as described above.

Once you’re happy with the positioning, screw them into place and test the door.

The Importance of Garage Door Sensors

What is the purpose of your sensors?

Their primary use is for safety. With an automatic door, you’ll push a button to open it, drive your car through, and then the door will close behind you.

The sensor comes into play if anything remains under the door when it tries to close. If there is anything, the door will reverse and open again, until the obstruction is removed. It prevents damage to your car and keeps the whole family safe when using the garage.

In the past, these sensors were mechanical and would reverse the door when the door touched the sensor physically.

These days, you’re much more likely to use a photoelectric eye as your sensor. In fact, these were made a legal requirement in 1993. These sensors have a beam that’s fired across the bottom of your doorway.

If anything breaks that beam, the system will not allow your door to shut until it has been removed.

A Note On Safety

Even if you’re simply looking to learn how to repair garage door sensors, it’s should be noted that working on any part of a garage door can be dangerous. Garage doors involve many moving parts, heavy equipment, and electrical components, so always approach the garage door with caution.

Before you attempt any repair on your garage door, it’s vital that you turn off the power to the door while you work on it.

You can usually do that on the garage door opener itself, so you won’t have to worry about the door closing on you while you’re working on it. If you’re not sure how to do this, you could turn off power to the garage itself at your circuit breaker.

Maintaining Your Garage Door Sensors

Once you’ve got your garage door sensors working again, you’ll want to ensure that they’re in top working condition from now on.

It’s best to include them in a regular all over garage door check, to see how they’re doing. At this point, you can spot any damage, and clean the eyes off to keep them clear and unobstructed. Doing this will ensure that you have fewer breakdowns and issues with the sensors, saving you money in the long run. Get into the habit of doing this, and you’ll find everything runs a lot smoother.

Fixing your garage door sensors is much easier than it looks. Often, all you’ll need to do is clean off the lenses or realign the sensors when needed. Even if they need to be replaced, it’s not too difficult to do. If you need help, you can always call an engineer to take a look for you.

Conclusion

Now that you know how to repair garage door sensors, you can work through each step and check to see if the problem was related to your sensors.

If you find the problem isn’t related to your garage door sensors, you may need to call a local garage door repair company. A professional repair service will provide a garage door inspection and offer an estimate for the required parts and repairs.

In most cases, the garage door sensors simply need to be cleaned or aligned. However, this may not be the case if your sensors are on the older side, weren’t installed properly, or need to be replaced due to damaged equipment.

If you’re in our service area, please consider making us Your Garage Door Guys.

The post How To Repair Garage Door Sensors appeared first on Your Garage Door Guys.

How to level a garage door?

Your garage door works well in all seasons without much repair. The door opens in a perfect balance from both sides. However, with continuous use, the garage door can become uneven and would not close until the end of one side. In such a case, you would need to check its balance. You call a local garage repair service who would level a garage door professionally.

If you think you can work it out yourself, you can follow the following steps to level a garage door:

1. The first step is to disconnect the door from the opener to check from where is the door out of balance. You can move the door up and down several times. This will help you identify until where the door closes and to check that it runs smoothly on the track. If the door falls quickly, it means they’ve lost tension on the springs.
2. Place c-clamps on the tracks so that the door does not lift up while you are working on it
3. Using a ladder, a wrench, and a winding bar start adjusting the tension of spring.
4. Climb the ladder and loosen the setscrew with a wrench while holding the winding bar. You will feel tension adjusting as you loosen the screws.
5. Place the first winding bar up- only a quarter turn and place the second winding bar in the hole and tighten the setscrew
6. Remove the winding bar and repeat the same process on the other side. It might take several attempts before both sides align and close together at the bottom.
7. Finally, check the level of the garage door.

If you think you need the help of a garage repair service call, Garage Door Doctor on 281-855-9300 or 281-578-7659, and our experts will help you level a garage door.

The post How to level a garage door? appeared first on Garage Door Doctor.

source https://www.garagedoordoctor.biz/how-to-level-a-garage-door

Garage Door Maintenance: 4 Tips for Long Life

Routine maintenance can help extend the life of your garage door. The professionals at Door Power detail what you need to do to avoid unexpected garage door repairs.

https://www.doorpower.com/About/Blog/entryid/79/garage-door-maintenance-4-tips-for-long-life

How Does Automatic Garage Door Repair Service Helps You?

Gates have been used since the history of human civilization evolved. The modern era has brought a new meaning to the concept of gates by modifying them and adding new features to it. Traditionally gates were made in order to define territory and also to create a strong sense of security for the community but in these days the gates are available in a wide range of varieties along with the innovative automatic functionality. Even cities had gates in order to help in the demarcation of boundaries of location. Today’s modern era gates have a more different and unique approach and objective. 

Garage gates today create the first impression when the garage is positioned in the front of the house. Apart from being a major source of security, it is also used as a status symbol. The more unique a gate, the more it is appreciated. In the modern era, automatic gates are satisfying the consumers more than the manual ones as they have more safety and security features to keep your vehicle protected with minimal closing and opening effort and maintenance.

For these different purposes, gates come in different shapes and sizes and are also made up of different materials. There are automatic gates, commercial gates, security gates, driveway gates, electric gates, sliding gates, chain link gates, wood gates, wrought iron gates, estate gates and many more gates.

Looking at the variety of garage gates, there have emerged many companies who not only provide with a customized version of a gate but also help in maintaining as well as repairing the gate whenever it is needed. The companies not only help maintain, but do all the activities right from design, installation, maintain to repairing of the gates. They even take contracts to maintain gates for a certain number of years and also help in choosing the kind of gate based on the need of a customer.

When to avail the automatic garage door repair service?

But you need to keep in mind that only doing an automatic garage door repair service cannot serve your life long without any hassle. There are many points that you should take care of to keep the automatic garage door properly functioning. But even after maintaining the garage door, you may get something wrong and you can’t keep the door open even for a single day. So, you need to detect the problem and fix it as soon as possible to ensure the security of the vehicle. There are some points that you need to keep in mind for understanding when to avail the automatic garage door repair service from a reputed company.

Continue reading the source article: How Does Automatic Garage Door Repair Service Helps You?

Visit our Website to learn more about our garage door services.